/* lteenb configuration file version 2022-05-24 * Copyright (C) 2015-2022 Amarisoft */ #define TDD 0 // Values: 0 (FDD), 1(TDD) #define N_RB_DL 100 // Values: 6 (1.4 MHz), 15 (3MHz), 25 (5MHz), 50 (10MHz), 75 (15MHz), 100 (20MHz) #define N_ANTENNA_DL 2 // Values: 1 (SISO), 2 (MIMO 2x2) #define N_ANTENNA_UL 2 // Values: 1, 2 #define CHANNEL_SIM 0 // Values: 0 (channel simulator disabled), 1 (channel simulator enabled) #define NG_ENB 0 // 1 for ng-eNB { /* Log filter: syntax: layer.field=value[,...] Possible layers are phy, mac, rlc, pdcp, rrc, nas, s1ap, x2ap, gtpu and all. The 'all' layer is used to address all the layers at the same time. field values: - 'level': the log level of each layer can be set to 'none', 'error', 'info' or 'debug'. Use 'debug' to log all the messages. - 'max_size': set the maximum size of the hex dump. 0 means no hex dump. -1 means no limit. */ //log_options: "all.level=debug,all.max_size=32", log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,s1ap.level=debug,s1ap.max_size=1,x2ap.level=debug,x2ap.max_size=1,rrc.level=debug,rrc.max_size=1", log_filename: "/tmp/enb0.log", /* Enable remote API and Web interface */ com_addr: "0.0.0.0:9001", /* RF driver configuration */ include "rf_driver/config.cfg", #if CHANNEL_SIM == 1 rf_ports: [ { channel_dl: { type: "awgn", noise_level: -30, }, } ], #endif mme_list: [ { /* address of MME for S1AP connection. Must be modified if the MME runs on a different host. */ mme_addr: "127.0.1.100", }, ], #if NG_ENB == 1 amf_list: [ { /* address of AMF for NGAP connection. Must be modified if the AMF runs on a different host. */ amf_addr: "127.0.1.100", }, ], #endif /* GTP bind address (=address of the ethernet interface connected to the MME). Must be modified if the MME runs on a different host. */ gtp_addr: "127.0.1.1", /* high 20 bits of SIB1.cellIdentifier */ enb_id: 0x1A2D0, /* list of cells */ cell_list: [ { /* Broadcasted PLMN identities */ plmn_list: [ "00101", ], #if NG_ENB == 1 plmn_list_5gc: [ { tac: 10, plmn_ids: [{ plmn: "00101", reserved: false }], }], #endif #if TDD == 1 //dl_earfcn: 38050, /* 2600 MHz (band 38) */ dl_earfcn: 40620, /* 2593 MHz (band 41) */ //dl_earfcn: 42590, /* 3500 MHz (band 42) */ #else //dl_earfcn: 300, /* DL center frequency: 2132 MHz (Band 1) */ //dl_earfcn: 900, /* DL center frequency: 1960 MHz (Band 2) */ //dl_earfcn: 1575, /* DL center frequency: 1842.5 MHz (Band 3) */ //dl_earfcn: 2150, /* DL center frequency: 2130 MHz (Band 4) */ //dl_earfcn: 2525, /* DL center frequency: 881.5 MHz (Band 5) */ dl_earfcn: 3350, /* DL center frequency: 2680 MHz (Band 7) */ //dl_earfcn: 6300, /* 806 MHz (Band 20) */ //dl_earfcn: 38050, /* 2600 MHz (band 38) */ //dl_earfcn: 40620, /* 2593 MHz (band 41) */ //dl_earfcn: 42590, /* 3500 MHz (band 42) */ #endif n_id_cell: 1, cell_id: 0x01, tac: 0x0001, root_sequence_index: 204, /* PRACH root sequence index */ force_dl_schedule: true, pdsch_mcs: [10,10,10,10,10,10,10,10,10,10], pdsch_fixed_rb_alloc: [true,true,true,true,true,true,true,true,true,true], pdsch_fixed_rb_start: [0,10,20,30,40,50,40,30,20,10], pdsch_fixed_l_crb: [10,10,10,10,10,10,10,10,10,10], }, ], /* cell_list */ /* default cell parameters */ cell_default: { n_antenna_dl: N_ANTENNA_DL, /* number of DL antennas */ n_antenna_ul: N_ANTENNA_UL, /* number of UL antennas */ #if TDD == 1 uldl_config: 2, /* TDD only */ sp_config: 7, /* TDD only */ #endif n_rb_dl: N_RB_DL, /* Bandwidth: 25: 5 MHz, 50: 10 MHz, 75: 15 MHz, 100: 20 MHz */ cyclic_prefix: "normal", phich_duration: "normal", phich_resource: "1", /* ratio of NG */ /* SIB1 */ si_value_tag: 0, /* increment modulo 32 if SI is modified */ cell_barred: false, /* SIB1.cellBarred-r13 */ intra_freq_reselection: true, /* SIB1.intraFreqReselection */ q_rx_lev_min: -70, /* SIB1.q-RxLevMin */ p_max: 10, /* maximum power allowed for the UE (dBm) */ si_window_length: 40, /* ms */ sib_sched_list: [ { filename: "sib2_3.asn", si_periodicity: 16, /* frames */ }, ], #if N_RB_DL == 6 si_coderate: 0.30, /* maximum code rate for SI/RA/P-RNTI messages */ #else si_coderate: 0.20, /* maximum code rate for SI/RA/P-RNTI messages */ #endif si_pdcch_format: 2, /* 2 or 3. Log2 of the number of CCEs for PDCCH for SI/RA/P-RNTI */ n_symb_cch: 0, /* number of symbols for CCH (0 = auto) */ /* PDSCH dedicated config (currently same for all UEs) */ pdsch_dedicated: { #if N_ANTENNA_DL == 4 p_a: -6, #elif N_ANTENNA_DL == 2 p_a: -3, #else p_a: 0, #endif p_b: -1, /* -1 means automatic */ }, /* If defined, force for number of CCEs for UE specific PDCCH to 2^pdcch_format. Otherwise it is computed from the reported CQI. Range: 0 to 3. */ #if N_RB_DL == 6 pdcch_format: 1, #else pdcch_format: 2, #endif /* if defined, force the PDSCH MCS for all UEs. Otherwise it is computed from the reported CQI */ /* pdsch_mcs: 12, */ #if N_RB_DL == 6 prach_config_index: 15, /* subframe 9 every 20 ms */ #else prach_config_index: 4, /* subframe 4 every 10 ms */ #endif prach_freq_offset: -1, /* -1 means automatic */ /* PUCCH dedicated config (currently same for all UEs) */ pucch_dedicated: { n1_pucch_sr_count: 11, /* increase if more UEs are needed */ cqi_pucch_n_rb: 1, /* increase if more UEs are needed */ #if TDD == 1 //tdd_ack_nack_feedback_mode: "bundling", /* TDD only */ tdd_ack_nack_feedback_mode: "multiplexing", /* TDD only */ #endif }, /* PUSCH dedicated config (currently same for all UEs) */ pusch_dedicated: { beta_offset_ack_index: 9, beta_offset_ri_index: 6, beta_offset_cqi_index: 6, }, pusch_hopping_offset: -1, /* -1 means automatic */ /* MCS for Msg3 (=CCCH RRC Connection Request) */ pusch_msg3_mcs: 0, /* this CQI value is assumed when none is received from the UE */ #if N_RB_DL == 6 initial_cqi: 5, #else initial_cqi: 3, #endif /* if defined, force the PUSCH MCS for all UEs. Otherwise it is computed from the last received SRS/PUSCH. */ // pusch_mcs: 18, dl_256qam: true, ul_64qam: true, /* Scheduling request period (ms). Must be >= 40 for HD-FDD */ sr_period: 20, /* CQI report config */ cqi_period: 40, /* period (ms). Must be >= 32 for HD-FDD */ #if N_ANTENNA_DL >= 2 /* RI reporting is done with a period of m_ri * cqi_period. m_ri = 0 (default) disables RI reporting. */ m_ri: 8, /* transmission mode */ transmission_mode: 3, #endif /* SRS dedicated config. All UEs share these parameters. srs_config_index and freq_domain_position are allocated for each UE) */ srs_dedicated: { #if N_RB_DL == 6 srs_bandwidth_config: 7, srs_bandwidth: 1, #elif N_RB_DL == 15 srs_bandwidth_config: 6, srs_bandwidth: 1, #elif N_RB_DL == 25 srs_bandwidth_config: 3, srs_bandwidth: 1, #elif N_RB_DL == 50 srs_bandwidth_config: 2, srs_bandwidth: 2, #elif N_RB_DL == 75 srs_bandwidth_config: 2, srs_bandwidth: 2, #else srs_bandwidth_config: 2, srs_bandwidth: 3, #endif srs_subframe_config: 3, /* 0 - 15 */ srs_period: 40, /* period (ms). Must be >= 40 for HD-FDD */ srs_hopping_bandwidth: 0, }, /* MAC configuration (same for all UEs) */ mac_config: { ul_max_harq_tx: 5, /* max number of HARQ transmissions for uplink */ dl_max_harq_tx: 5, /* max number of HARQ transmissions for downlink */ }, /* CPU load limitation */ pusch_max_its: 6, /* max number of turbo decoder iterations */ /* dynamic power control */ dpc: true, dpc_pusch_snr_target: 25, dpc_pucch_snr_target: 20, /* RRC/UP ciphering algorithm preference. EEA0 is always the last. */ cipher_algo_pref: [], /* RRC integrity algorithm preference. EIA0 is always the last. */ integ_algo_pref: [2, 1], /* (in ms) send RRC connection release after this time of network inactivity */ inactivity_timer: 10000, /* SRB configuration */ srb_config: [ { id: 1, maxRetxThreshold: 32, t_Reordering: 45, t_PollRetransmit: 60, }, { id: 2 , maxRetxThreshold: 32, t_Reordering: 45, t_PollRetransmit: 60, } ], /* DRB configuration */ drb_config: "drb.cfg", }, }