/* lteenb configuration file version 2024-05-07
 * Copyright (C) 2019-2024 Amarisoft
 * NR SA TDD cell with a configuration aimed at low latency */


#define N_ANTENNA_DL         2  // Values: 1 (SISO), 2 (MIMO 2x2), 4 (MIMO 4x4)
#define N_ANTENNA_UL         1  // Values: 1, 2, 4
#define NR_BANDWIDTH         20 // NR cell bandwidth

/* define to 1 to enable periodic SRS with N_ANTENNA_UL ports. Uplink
   SU-MIMO is also enabled if N_ANTENNA_UL >= 2. Not all UEs support
   uplink SU-MIMO. */
#define USE_SRS             0

{
  //log_options: "all.level=debug,all.max_size=1",
  log_options: "all.level=error,all.max_size=0,nas.level=debug,nas.max_size=1,ngap.level=debug,ngap.max_size=1,xnap.level=debug,xnap.max_size=1,rrc.level=debug,rrc.max_size=1",

  log_filename: "/tmp/gnb0.log",

  /* Enable remote API and Web interface */
  com_addr: "[::]:9001",

  rf_driver: {
        name: "sdr",

        /* list of devices. 'dev0' is always the master. */
#if N_ANTENNA_DL >= 4
        args: "dev0=/dev/sdr0,dev1=/dev/sdr1",
#else
        args: "dev0=/dev/sdr0",
#endif
        /* TDD: force the RX antenna on the RX connector */
        rx_antenna: "rx",

        /* synchronisation source: none, internal, gps, external (default = none) */
        // sync: "gps",
  },
  tx_gain: 90.0, /* TX gain (in dB) */
  rx_gain: 60.0, /* RX gain (in dB) */


  amf_list: [
    {
      /* address of AMF for NGAP connection. Must be modified if the AMF runs on a different host. */
      amf_addr: "127.0.1.100",
    },
  ],
  /* GTP bind address (=address of the ethernet interface connected to
     the AMF). Must be modified if the AMF runs on a different host. */
  gtp_addr: "127.0.1.1",
#ifdef GTP_U_BUNDLING
  gtp_use_packet_bundling: true,
#endif

  gnb_id_bits: 28,
  gnb_id: 0x12345,

  en_dc_support: true,

  /* list of cells */
  cell_list: [],

  nr_cell_list: [
  {
    rf_port: 0,
    cell_id: 0x01,
    band: 78,
    dl_nr_arfcn: 632628,  /* 3489.42 MHz */
    subcarrier_spacing: 30, /* kHz */
    rx_to_tx_latency: 3,
    ssb_pos_bitmap: "10000000",
  },
  ], /* nr_cell_list */

  nr_cell_default: {
    bandwidth: NR_BANDWIDTH, /* MHz */
    n_antenna_dl: N_ANTENNA_DL,
    n_antenna_ul: N_ANTENNA_UL,

    /* force the timing TA offset (optional) */
//    n_timing_advance_offset: 39936,
    /* subframe offset to align with the LTE TDD pattern (optional) */
//    subframe_offset: 2,
    
    tdd_ul_dl_config: {
      pattern1: {
        period: 1,
        dl_slots: 1,
        dl_symbols: 0,
        ul_symbols: 12,
        ul_slots: 0,
      },
    },
    ssb_period: 20, /* in ms */
    n_id_cell: 500,

    plmn_list: [ {
      tac: 100,
      plmn: "00101",
      reserved: false,
      nssai: [
        {
         sst: 1,
        },
        /*{
         sst: 2,
        },
        {
         sst: 3,
         sd: 50,
        },*/
       ],
      },
    ],

    /*sib_sched_list: [
      {
        filename: "sib2_nr.asn",
        si_periodicity: 16,
      },
      {
        filename: "sib3_nr.asn",
        si_periodicity: 16,
      },
      {
        filename: "sib4_nr.asn",
        si_periodicity: 32,
      },
    ],
    sib9: {
      si_periodicity: 32
    },*/
    si_window_length: 40,

    cell_barred: false,
    intra_freq_reselection: true,
    q_rx_lev_min: -70,
    q_qual_min: -20,
    //p_max: 10, /* dBm */

    root_sequence_index: 1, /* PRACH root sequence index */

    /* Scheduling request period (slots). */
    sr_period: 2,

    dmrs_type_a_pos: 2,

    /* to limit the number of HARQ feedback in UL, use pdsch_harq_ack_max;
       allows to workaround issues with SM-G977N for example */
    //pdsch_harq_ack_max: 2,

    prach: {
      prach_config_index: 128, /* format A3, subframes 7 and 9, begins at symbol 7 */  
      msg1_subcarrier_spacing: 30, /* kHz */
      msg1_fdm: 1,
      msg1_frequency_start: -1,
      zero_correlation_zone_config: 15,
      preamble_received_target_power: -110, /* in dBm */
      preamble_trans_max: 7,
      power_ramping_step: 4, /* in dB */
      ra_response_window: 20, /* in slots */
      restricted_set_config: "unrestricted_set",
      ra_contention_resolution_timer: 64, /* in ms */
      ssb_per_prach_occasion: 1,
      cb_preambles_per_ssb: 8,
    },

    pdcch: {
      search_space0_index: 0,

      dedicated_coreset: {
        rb_start: -1, /* -1 to have the maximum bandwidth */
        l_crb: -1, /* -1 means all the bandwidth */
        duration: 0, /* 0 means to automatically set it from the coreset bandwidth */
        precoder_granularity: "sameAsREG_bundle",
      },

      css: {
        n_candidates: [ 0, 0, 4, 0, 0 ],
      },
      rar_al_index: 2,
      si_al_index: 2,

      uss: {
        n_candidates: [ 0, 4, 0, 0, 0 ],
        dci_0_1_and_1_1: true,
      },
      al_index: 1,
    },

    k_min: 2,
    pdsch: {
      mapping_type: "typeA",
      dmrs_add_pos: 1,
      dmrs_type: 1,
      dmrs_max_len: 1,
      /* k0 delay in slots from DCI to PDSCH: automatic setting */
      /* k1 delay in slots from PDSCH to PUCCH/PUSCH ACK/NACK: automatic setting */
      mcs_table: "qam64",   /* Maximize reliability over throughput */
      rar_mcs: 2,
      si_mcs: 6,
      /* If defined, force the PDSCH MCS for all UEs. Otherwise it is computed
       * based on DL channel quality estimation */
      /* mcs: 24, */
    },

    csi_rs: {
      resource_auto : {
        nzp_csi_rs_period: 40,
        trs_presence: false,
        exclude_slot_ssb: false,
        exclude_slot_sib1: false,
      },
      csi_report_config: [
        {
          report_config_type: "periodic",
          period: 40,
          report_quantity: "CRI_RI_PMI_CQI",
        },
      ],
    },
    
    pucch: {
      pucch_group_hopping: "neither",
      hopping_id: -1, /* -1 = n_cell_id */
      p0_nominal: -96,
        pucch0: {
          initial_cyclic_shift: 1,
          n_symb: 1,
        },
        pucch2: {
          n_symb: 2,
          n_prb: 1,
          freq_hopping: true,
          simultaneous_harq_ack_csi: false,
          max_code_rate: 0.25,
        },
        short_pucch_an_rsc_count: 4,
        long_pucch_an_rsc_count: 2,
    },
    simultaneous_sr_csi: true,

#if USE_SRS
    srs: {
      srs_symbols: [ 0, 1 ],
      srs_resource: [
        {
          srs_resource_id: 0,
          n_ports: N_ANTENNA_UL,
          resource_type: "periodic",
          period: 80, /* in slots */
        }
      ],
      srs_resource_set: [
        {
          srs_resource_id_list: [ 0 ],
        },
      ],
    },
#endif

    pusch: {
      mapping_type: "typeB",
      start_symb: 2,
      n_symb: 12,
      dmrs_add_pos: 1,
      dmrs_type: 1,
      dmrs_max_len: 1,
      tf_precoding: false,
      mcs_table: "qam256", /* without transform precoding */
      mcs_table_tp: "qam256", /* with transform precoding */
      ldpc_max_its: 5,
      /* k2, msg3_k2 delay in slots from DCI to PUSCH: automatic setting */
      p0_nominal_with_grant: -84,
      msg3_mcs: 4,
      msg3_delta_power: 0, /* in dB */
      beta_offset_ack_index: 9,
#if USE_SRS
      max_rank: N_ANTENNA_UL,
#endif

      /* if defined, force the PUSCH MCS for all UEs. Otherwise it is
       computed from the last received PUSCH. */
      /* mcs: 16, */
    },

    /* MAC configuration */
    mac_config: {
      msg3_max_harq_tx: 5,
      ul_max_harq_tx: 5, /* max number of HARQ transmissions for uplink */
      dl_max_harq_tx: 5, /* max number of HARQ transmissions for downlink */
      ul_max_consecutive_retx: 30, /* disconnect UE if reached */
      dl_max_consecutive_retx: 30, /* disconnect UE if reached */
      periodic_bsr_timer: 20,
      retx_bsr_timer: 320,
      periodic_phr_timer: 500,
      prohibit_phr_timer: 200,
      phr_tx_power_factor_change: "dB3",
      sr_prohibit_timer: 0, /* in ms, 0 to disable the timer */
      sr_trans_max: 64,
    },

    cipher_algo_pref: [],
    integ_algo_pref: [2, 1],

    inactivity_timer: 10000,

    drb_config: "drb_nr.cfg",
  },
}